Multiple Sweeping Tuneable Vibration Absorbers for broad band vibration control

This paper presents a simulation study concerning the control of flexural vibration in a lightly damped thin plate, which is equipped with three sweeping TuneableVibration Absorbers and is excited by a rain on the roof broad frequency band stationary disturbance. The sweeping Tuneable Vibration Absorbers are semi-active mass-spring-dashpot systems whose stiffness and damping properties can be varied uniformly within given ranges. They are operated in such a way as their characteristic natural frequencies are continuously varied to control the observed flexural modes that resonate within given frequency bands. More specifically, in this study the three sweeping Tuneable Vibration Absorbers are operated asynchronously, each within one of three sequential frequency bands comprised between 20-120, 120-220, 220-320 Hz. The flexural vibration control effects produced by the three sweeping Tuneable Vibration Absorbers are compared to those produced by three classical Tuneable Vibration Absorbers, each set to control a flexural mode of the plate resonating in one of these three frequency bands. The study shows that the proposed sweeping Tuneable Vibration Absorbers outperform the classical Tuneable Vibration Absorbers and produce about 6, 5, 4 dB reduction of the panel flexural response in the three frequency bands of operation. Also, the study indicates that the sweeping Tuneable VibrationAbsorbers are robust to variations in the plate flexural response. For instance they still produce about 5.1, 5.3, 4.6 dB reductions of the panel flexural response in the three frequency bands of operation when the panel is tensioned such that the flexural natural frequencies are shifted up from about 40%, for the first resonance, to 7%, for the tenth resonance