In the calculation of the reaction curve for grounds reinforced with jet grouting umbrellas in tunnels, the jet grouting progressive hardening is ignored by assuming mean values for the jet grouting properties. In this paper, we present a new procedure that calculates the reaction curve for these grounds, considering jet grouting hardening. Tunnel excavation is represented in the ground plane-strain analysis by increasing the tunnel convergence at a rate obtained from the tunnel longitudinal deformation profile. This novelty allows us to perform the analysis at an accurate rate, which is critical for jet grouted tunnels. Using this new approach, one can estimate a lower bound for convergence of supported tunnels and hence an upper bound for pressure on the tunnel supports. Using a finite element model, we calculate the ground reaction curves for a case study tunnel with and without considering jet grouting hardening. The resulting curves illustrate that ignoring the jet grouting hardening can lead to an unsafe design of these tunnels. We use the ground reaction curve to also estimate the savings in tunnel supports due to jet grouting and the efficiency of jet grouting at different tunnel advance rates. © 2015 Elsevier Ltd.

Ground reaction curve for tunnels with jet grouting umbrellas considering jet grouting hardening

Tonon, Fulvio
Secondo
Writing – Original Draft Preparation
2015-01-01

Abstract

In the calculation of the reaction curve for grounds reinforced with jet grouting umbrellas in tunnels, the jet grouting progressive hardening is ignored by assuming mean values for the jet grouting properties. In this paper, we present a new procedure that calculates the reaction curve for these grounds, considering jet grouting hardening. Tunnel excavation is represented in the ground plane-strain analysis by increasing the tunnel convergence at a rate obtained from the tunnel longitudinal deformation profile. This novelty allows us to perform the analysis at an accurate rate, which is critical for jet grouted tunnels. Using this new approach, one can estimate a lower bound for convergence of supported tunnels and hence an upper bound for pressure on the tunnel supports. Using a finite element model, we calculate the ground reaction curves for a case study tunnel with and without considering jet grouting hardening. The resulting curves illustrate that ignoring the jet grouting hardening can lead to an unsafe design of these tunnels. We use the ground reaction curve to also estimate the savings in tunnel supports due to jet grouting and the efficiency of jet grouting at different tunnel advance rates. © 2015 Elsevier Ltd.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11390/1127833
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 36
  • ???jsp.display-item.citation.isi??? 31
social impact