Interstitial condensation and water accumulation risk in building envelopes could be assessed with methods and models based on moisture migration through porous media coupled to heat transfer. One of the difficulties in evaluating the boundary conditions for the heat and mass transfer modelis the choice of an appropriate weather file. The most advanced models, described by the standard EN 15026:2007, require the hourly values of rain, wind, radiation, temperature and relative humidity to compute the water content in the porous materials. In this contribution, the method described by the standard EN ISO 15927-4:2005, typically used to design Moisture Reference Years(MRY), has been extended to the design of 34 typologies of representative weather files. The generation criteria have been based on the assumption that the simulation results are influenced by rain deposition on the considered wall. The procedure has been followed considering 5 different wall exposures that lead to different MRY. The years of the climate of Turin (Italy) between 2002 and 2016 have been considered for the generation of the reference years. Finally, the annual mean moisture contents for two common wall types have been calculated using the obtained MRY and compared to the annual mean moisture contents obtained with the measured weather data, and the effects of the selection of the weather parameters is presented.
Hygrothermal modelling of building enclosures: reference year design for moisture accumulation and condensation risk assessment
Michele Libralato
;Onorio Saro;Alessandra De Angelis;
2018-01-01
Abstract
Interstitial condensation and water accumulation risk in building envelopes could be assessed with methods and models based on moisture migration through porous media coupled to heat transfer. One of the difficulties in evaluating the boundary conditions for the heat and mass transfer modelis the choice of an appropriate weather file. The most advanced models, described by the standard EN 15026:2007, require the hourly values of rain, wind, radiation, temperature and relative humidity to compute the water content in the porous materials. In this contribution, the method described by the standard EN ISO 15927-4:2005, typically used to design Moisture Reference Years(MRY), has been extended to the design of 34 typologies of representative weather files. The generation criteria have been based on the assumption that the simulation results are influenced by rain deposition on the considered wall. The procedure has been followed considering 5 different wall exposures that lead to different MRY. The years of the climate of Turin (Italy) between 2002 and 2016 have been considered for the generation of the reference years. Finally, the annual mean moisture contents for two common wall types have been calculated using the obtained MRY and compared to the annual mean moisture contents obtained with the measured weather data, and the effects of the selection of the weather parameters is presented.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
