This paper discusses the results of a study aimed at designing cement bound mixtures for road construction, made with steel slag, ladle furnace slag, waste foundry sand, glass wastes and coal ash. The mixtures were designed by means of Proctor, compression and indirect tensile tests. Their performance was investigated in terms of elastic modulus, through ultrasonic tests at different curing times. Satisfactory results were obtained, compression and indirect tensile strength at 7 days being up to 7.56 MPa and 0.78 MPa respectively, depending on the composition of the mixtures. © 2016 Elsevier Ltd. All rights reserved.
Recycling of waste aggregate in cement bound mixtures for road pavement bases and sub-bases
BALDO, NicolaSecondo
2016-01-01
Abstract
This paper discusses the results of a study aimed at designing cement bound mixtures for road construction, made with steel slag, ladle furnace slag, waste foundry sand, glass wastes and coal ash. The mixtures were designed by means of Proctor, compression and indirect tensile tests. Their performance was investigated in terms of elastic modulus, through ultrasonic tests at different curing times. Satisfactory results were obtained, compression and indirect tensile strength at 7 days being up to 7.56 MPa and 0.78 MPa respectively, depending on the composition of the mixtures. © 2016 Elsevier Ltd. All rights reserved.File in questo prodotto:
File | Dimensione | Formato | |
---|---|---|---|
1-s2.0-S0950061816300253-main.pdf
non disponibili
Descrizione: Articolo principale
Tipologia:
Versione Editoriale (PDF)
Licenza:
Non pubblico
Dimensione
667.17 kB
Formato
Adobe PDF
|
667.17 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.